Brother HL-2270DW Wireless Setup is easy to do- process. Want assistance with the wireless setup of your Brother HL-2270DW printer? Follow the easy guidelines in the blog to attain Brother 2270DW Wireless Setup with ease. Brother is a known brand in the printing industry. Brother Printers are one of the top preferences of people across the globe, owing to their superior quality outputs at reasonable prices. Brother HL- 2270DW is one of the printer models.This printer model has added convenience as it offers wireless features and laser printer benefits. Follow the easy guidelines in the blog for Brother HL-2270DW Wireless Setup.
Brother HL-2270DW Wireless Printer Setup instructions
You can connect your Brother HL-2270DW printer to Wi-Fi by following means
- Through AOSS or Air station One-Touch Secure System
- BY WPS or Wi-Fi Protected Setup.
But in either of these cases, you need to ensure that WLAN supports the configurations
Brother 2270DW Wireless Setup by Wi-Fi method
- Place your Broth printer in proximity to WPS/AOSS access point or router.
- Next, ensure that the power cord is plugged in. Now, wait till the machine is in Ready state.
- Locate the WPS/AOSS button and hold down the button for a few seconds.
- However, depending upon the router device, the length of time to hold the button down pressed, might vary
- Next, press the wireless setup button on the back of the printer for 2 seconds for moving ahead with Brother 2270DW Wireless Setup . You can use the tip of the ballpoint for the same.
- Make any pointed object otherwise and make sure not to press the button for more than 3 seconds
- The PIN method for the Wi-Fi Protected Setup mode will change if you do so
- Again, you might have to wait for another 5 minutes at least for this mode to clear
Alternatively, you might have to turn the printer off entirely and start the process all over again for Brother HL-2270DW Wireless Setup
- Next, the printer will search for a WLAN access point or router that supports WPS/AOSS. This may take 2 mins. During this period the Toner LED will start to blink.
- When the printer is establishing a connection with WLAN access pint or router, both the toner and drum LEDs will initiate blinking.
- You need to wail for some time until the printer establishes the connection successfully. If the Ready LED turns on for 5 mins, this indicated the printer had established a connection with the WLAN access point/router.
You have completed the Brother HL-2270DW Wireless Setup. For added assistance, you can communicate with advanced Brother Printer Support. The experts will guide you for easy Brother Printer Setup. Connect with experts to clarify all your doubts for wireless setup.
